RF300 Rudder Feedback Unit
The RF300 rudder feedback unit contributes towards smooth and accurate auto-steering by determining rudder angle. It is to be used as part of an autopilot system on boats with inboard engines.
Part Number: 20193744
RF40
The RF40 is a medium-duty rudder feedback unit for use with NAC-1 and NAC-2 autopilot. 15 m (50 ft cable)
Part Number: 000-14439-001
RF25N NMEA2000 Rudder Feedback Unit
RF25N, Rudder Feedback Unit: With transmission link and 5m (16.5 ft) NMEA2000 Micro-C cable
Part Number: 000-10756-001
OP12 Autopilot Controller
OP12 wired remote integrates with Simrad autopilot systems to provide intuitive mode control, course adjustments, and power steering. Τhis remote can be combined with the IS42 to create a standalone autopilot controller, or used as a dedicated autopilot keypad for GO, NSS and NSO evo2.
Part Number: 000-13287-001
WR10 Autopilot remote and base station
WR10 Wireless Autopilot remote and Base station
Part Number: 000-12316-001
AP44 Autopilot Controller
AP44 Autopilot controller: Rotary dial course adjuster, optically bonded 4.1-inch color display
Part Number: 000-13289-001
RF45X Rudder Feedback Unit
RF45X Rugged rudder Feedback Unit: with transmission link and 2 m cable and Junction box
Part Number: 22011415
PRECISION-9 COMPASS
The Precision-9 Compass. Outputs Heading (20Hz), Rate Of Turn (20 Hz), roll, and pitch (10 hZ) over the NMEA 2000® network.
Part Number: 000-12607-001
PUMP-2,12V HYDRAULIC,0.8L
PUMP-2: 12V DC: Reversible hydraulic gear pump. Flow rate: 800 cc (49 cu.in) / min. For cylinder displacement of 80 cc - 250 cc (4.9 - 15.2 cu.in) (NAC-2 / AC12 required).
Part Number: 000-15444-001
QS80
QS80 Quickstick remote unit with display, 6m factory mounted drop cable, T-connector, front bezel, installation and user manual, gasket for panel mounting, mounting screws. Take command and Mode buttons. Provides course change in Auto mode.
Part Number: 000-10184-001
