Foulfree by AIRMAR 15ml Kit Airmar® Certified
Any marine growth or fouling on the face of a transducer can reduce sensitivity, decreasing bottom-echo returns and fish-target intensity.
It can also increase the turbulence under the face of the transducer, causing aeration and therefore loss of bottom contact.
Solving these challenges in the best possible manner is the reason that Airmar teamed with Propspeed® International to develop Foulfree™ fouling release coating for transducers.
The proprietary clear coat forms a slick surface that marine growth can’t grab onto, keeping your transducer's active face clean and clear.
*Airmar certifies that the application of Foulfree™ coating on its transducers results in no loss in transducer performance.
Features:
HDI Skimmer med/high (455/800 kHz) transducer. 9 pin Black X-Sonic Connector. Cable Length 6 m (20 ft)
9 Pin 50/200 kHz transom-mount skimmer depth/temp - black 9 pin connector
XT-12BL 12ft blue 7 pin transducer extension Cable: 3.65 m (12 ft)
Stainless steel StructureScan™ HD Sonar thru-hull transducer. (Single). Cable length 7.6 m (25 ft)
Through-Hull Bronze HDI Transducer. 50/200kHz 455/800 kHz DownScan. Black 9 Pin pin connector and 10m (33ft) cable.
XSONIC AIRMAR M260. The M260 is a plastic/urethane, in-hull Broadband transducer, ideal for smaller sportfishing and commercial vessels 8 m (25 ft) and up, fishing in depths of less than 900 m (3000 ft). Black 9 Pin connector
TM260 - Plastic 1kW Transom-Mounted 50/200kHz Depth and Temperature transducer. 9-pin connector and 10m cable.
B258 - Bronze 1kW Fairing-Block Through-Hull 50/200 kHz Depth/Temperature Transducer. Black 9pin connector and 10m (33ft) cable
Transducer Extension Cables for StructureScan® 3D - 10ft (3m)
SS60 (0°) - Stainless Steel 600 W Through-Hull 50/200 kHz Depth/Temperature Sonar Transducer. Black 9pin connector and 10m (33ft) cable.
TotalScan™ Through-Hull Transducer with Medium/High Chirp and 455/800kHz Down and SideScan.
Through-Hull Bronze HDI Transducer. 50/200kHz 455/800 kHz DownScan. Black 9 Pin pin connector and 10m (33ft) cable.
7pin adapter cable to bare wires. To connect a bare-wire transducer to a display with 7pin sonar port.
SS60 (20°) - Stainless Steel 600 W Through-Hull 50/200 kHz Depth/Temperature Sonar Transducer. Black 9pin connector and 10m (33ft) cable.
Ελληνικά
