Yamaha Engine Interface
Yamaha engine interface cable 4.5 m (15 ft) and T-connector
SimNet cable 10 m (33 ft) note: for simNet backbone only
Yamaha engine interface cable 4.5 m (15 ft) and T-connector
Ethernet Cable -Yellow 5-Pin Male-Male - 7.6 m (25 ft)
RJ45-Yellow Round Ethernet adapter cable RJ45 Male / 5 Pin Female 10 cm (6")
Ethernet adapter cable, RJ45 F to 5 Pin male, 1.5 m (4.9 ft). Ships with water proof boot.
SimNet power cable with terminator 2 m (6.6 ft) - red tip
Adapter cable: Ethernet yellow 5 pin male to RJ45 female, 2m (6.5ft)
SimNet to Micro-C (male) cable that connects a SimNet product to a NMEA 2000® backbone 0.5 m (1.6 ft)
N2KEXT-15RD - 4.55 m (15-ft) NMEA 2000® cable for backbone extension or or drop cable to connect an additional network device
Fluid Level Sensor - Connects to a standard suitable tank level sensor and transmits the tank level on the the NMEA 2000 network.
NMEA 0183® - NMEA 2000® converter. 1.8 m (6 ft) Micro-C to bare wire cable
NEP-2 Network Expansion Port enables multiple displays to exchange chart data, waypoint and route information, as well as interconnecting radar and echosounder modules.
RJ45-Yellow Round Ethernet adapter cable RJ45M / 5PinF for products with waterproof RJ45 socket.
Fuel Data Manager - Monitors Fuel Rate/Fuel Flow from NMEA 2000 engines and fuel flow sensors, and accumulates Fuel Rate into Fuel Used. Outputs seasonal, trip and total fuel used.