Cart
  • Out-of-Stock
    MiniPlex-3USB-N2K

MiniPlex-3USB-N2K NMEA-0183 / 2000 MULTIPLEXER (USB/N2K)

€370.76
Tax included
1135

The MiniPlex-3 Series NMEA multiplexers comprises a range of advanced NMEA multiplexers which combines data from multiple navigation instruments.

 

Out-of-Stock
Quantity

NMEA routing NMEA filtering NMEA 2000 USB SeaTalk® conversion Priority Channel information Talker ID substitution NMEA conversions The MiniPlex-3 offers several conversion options for NMEA sentences: Magnetic to True heading conversion and vice versa GPS speed to Log speed and vice versa Reverse True heading Old (VWR) to new (MWV) wind sentences and vice versa Relative/Apparent to Theoretical/True wind RMC to GGA

 

Features:

The MiniPlex-3 Series has a rich set of features and configuration options, enabling the user to tackle almost any NMEA bottleneck or interface problem. The configuration tool MPX-Config3 allows full configuration of the multiplexer and monitoring of NMEA data passing through the multiplexer.

NMEA routing

NMEA data can be routed from any input to any output. A default route can be set as well as specific routing rules for individual NMEA sentences.
Computer data can be routed to any NMEA output, to be merged with other NMEA data or to override this data. This enables automatic switching between computer based navigation and GPS/instrument based navigation.

NMEA filtering

A flexible NMEA filter can be configured to pass or block specific sentences from each input channel. This greatly reduces the chance of an overflow and the resulting loss of data. Many GPS receivers for instance, transmit an abundance of sentences every second, accounting for 85% of the available bandwidth of an NMEA 0183 port at 4800 Baud. By blocking unwanted or unnecessary sentences, bandwidth is preserved for other instruments. The filter can also be configured to reduce the rate of specific NMEA sentences.

NMEA 2000
(-N2K models only)

The MiniPlex-3-N2K models are equipped with an NMEA 2000 interface to connect to an NMEA 2000 backbone with other navigation instruments. The MiniPlex-3 will translate NMEA 2000 PGN’s (messages) into NMEA 0183 sentences and vice versa. This feature enables a seamless integration between NMEA 0183 and NMEA 2000 navigation devices. It also allows navigation software, which usually only supports NMEA 0183, to receive data from NMEA 2000 devices and to control NMEA 2000 autopilots.

Flexible communication speed

The communication speed of all inputs and outputs can be set from 4800 to 57600 Baud to allow connection of devices that operate at non-standard (4800 Baud) communication speeds like integrated weather sensors, gyrocompasses or AIS receivers and transponders.

SeaTalk® conversion

When Input 1 is set to SeaTalk mode, this NMEA input becomes a bi-directional SeaTalk port, offering conversion between the most common SeaTalk datagrams on a Raymarine SeaTalk1® network and their NMEA 0183 counterparts.

These sentences are combined with NMEA sentences received on the other inputs. When Priority is enabled, SeaTalk data can be assigned highest or lowest priority.

Priority

With Priority enabled, similar NMEA sentences on different inputs are only passed from the input with the highest priority. When for instance two GPS receivers are connected to inputs 1 and 2, and both transmit the same type of NMEA sentences, only those received on input 1 are passed. An adjustable time-out ensures that similar sentences from the GPS at input 2 are passed when the GPS at input 1 stops sending these sentences. Optionally, GPS sentences are checked for a valid status field, causing automatic switchover when the primary GPS looses satellite signal.

An additional option to check the GPS status flags can be enabled to ensure that data received from a GPS which lost satellite reception is also blocked.

Channel information

This features adds an extra $MXSTN sentence or a TAG block to NMEA sentences to indicate on which NMEA input a sentence is received.

Talker ID substitution

Talker ID substitution changes the talker ID of incoming sentences. The talker ID can be specified for each input channel. This option is useful for software or instruments that expect a specific talker ID or to distinguish between sentences from two similar instruments.

NMEA conversions

The MiniPlex-3 offers several conversion options for NMEA sentences:

  • Magnetic to True heading conversion and vice versa
  • GPS speed to Log speed and vice versa
  • Reverse True heading
  • Old (VWR) to new (MWV) wind sentences and vice versa
  • Relative/Apparent to Theoretical/True wind
  • RMC to GGA




Specifications:

Supply voltage:

8-35VDC, secured against reversed polarity

Current consumption:

30mA (80mA max. with fully loaded talker ports)

Computer interface:

USB, galvanically isolated

Inputs:

4 x NMEA 0183/RS-422, galvanically isolated
Input 1 can be set to SeaTalk mode

Input resistance:

> 1.4 kOhm

Input current:

0.5mA @ 2V
3.0mA @ 5V
7.1mA @ 10V

Outputs:

2 x NMEA 0183/RS-422, galvanically isolated

Max ouput current:

20mA @ > 2V

Filter list size:

50 sentence types

Priority list size:

50 sentence types

Speed NMEA In 1-3:

4800 - 57600 baud

Speed NMEA In 4/Out 1:

4800 - 57600 baud

Speed NMEA Out 2:

4800 - 115200 baud

Dimensions:

138 x 62 x 30mm

NMEA 2000:

LEN: 1
Speed: 250kbps

Connector:

M12 male Micro-C

1135
Out-of-Stock

16 other products in the same category:

MR-208

€370.76
Add to cart
Availability: Out of stock

The MR-208 a fully programmable 2-lnput/8-Output NMEA Buffer that can be used on a plethora of applications and meet even the most exacting installation standards.

 

Fuel Data Manager

€174.95
Availability: 1 In Stock

Fuel Data Manager - Monitors Fuel Rate/Fuel Flow from NMEA 2000 engines and fuel flow sensors, and accumulates Fuel Rate into Fuel Used. Outputs seasonal, trip and total fuel used.

This website uses cookies to ensure you get the best experience on our website.