
Yamaha Engine Interface
Yamaha engine interface cable 4.5 m (15 ft) and T-connector
SimNet cable 10 m (33 ft) note: for simNet backbone only
Yamaha engine interface cable 4.5 m (15 ft) and T-connector
NMEA2000 Micro-C Medium duty cable. 2 m (6.5 ft). Low loss 18 gauge cable recommended for network backbone runs
SimNet to Micro-C (male) cable that connects a SimNet product to a NMEA 2000® backbone 0.5 m (1.6 ft)
Adapter cable: Ethernet yellow 5 pin male to RJ45 female, 2m (6.5ft)
NMEA 0183® - NMEA 2000® converter. 1.8 m (6 ft) Micro-C to bare wire cable
35 m (115 ft) NMEA2000 Wind vane cable (Micro-C male - Simnet)
Ethernet Cable -Yellow 5-Pin Male-Male - 7.6 m (25 ft)
NMEA 2000 Micro-C Medium duty cable. 10 m (33 ft) Low loss 18 gauge cable recommended for network backbone runs
Fluid Level Sensor - Connects to a standard suitable tank level sensor and transmits the tank level on the the NMEA 2000 network.
RJ45-Yellow Round Ethernet adapter cable RJ45 Male / 5 Pin Female 10 cm (6")
The MiniPlex-3 Series NMEA multiplexers comprises a range of advanced NMEA multiplexers which combines data from multiple navigation instruments.
Ethernet Cable -Yellow 5-Pin Male-Male - 1.8 m (6 ft)
N2KEXT-6RD - 1.82 m (6-ft) NMEA 2000® cable for backbone extension or drop cable to connect an additional network device
Ethernet Cable -Yellow 5-Pin Male-Male - 4.5 m (15 ft)
N2K-T-RD - Micro-C T-connector for connection of an additional network device