

Yamaha engine interface cable 4.5 m (15 ft) and T-connector
Yamaha Engine Interface Cable
Connects to Yamaha engines without Yamaha CommandLink Plus system.
Yamaha | 4-stroke 50-250| 2-stroke HDPI 150-350| |
RPM | Yes| Yes |
Alternator Voltage | Yes| Yes |
Engine Hours | Yes| Yes |
Engine Temperature | Yes| Yes |
Fuel Pressure | Yes| Yes |
Fuel Rate | Yes| Yes |
Oil Pressure | Yes| Yes |
Trim * | Yes| Yes |
Water Pressure | Yes| Yes |
*Requires NMEA 2000 network. Kit includes T-connector to connect to a new or existing NMEA 2000 network. Add NMEA 2000 starter kit, part number 000-0124-69, if a network is not already installed.
NMEA 0183® - NMEA 2000® converter. 1.8 m (6 ft) Micro-C to bare wire cable
NEP-2 Network Expansion Port enables multiple displays to exchange chart data, waypoint and route information, as well as interconnecting radar and echosounder modules.
The IP CAM-1 marine grade 316 stainless steel IP camera. Powered by 12V DC or PoE.
N2KEXT-2RD - 0.61 m (2-ft) NMEA 2000® cable for backbone extension or drop cable to connect an additional network device
Ethernet adapter cable, RJ45 F to 5 Pin male, 1.5 m (4.9 ft). Ships with water proof boot.
The MiniPlex-3 Series NMEA multiplexers comprises a range of advanced NMEA multiplexers which combines data from multiple navigation instruments.
RJ45-Yellow Round Ethernet adapter cable RJ45M / 5PinF for products with waterproof RJ45 socket.
SimNet cable 10 m (33 ft) note: for simNet backbone only
20 m (66 ft) NMEA2000 Wind vane cable (Micro-C male - Simnet)
N2KEXT-25RD - 7.58 m (25-ft) NMEA 2000® cable for network backbone extension only
Fuel Flow Sensor - For gasoline engines. In-line sensor for 3/8" (9.5 mm) Inside Diameter fuel line. Comes with 10ft cable and T-connector.
Fluid Level Sensor - Connects to a standard suitable tank level sensor and transmits the tank level on the the NMEA 2000 network.
Ethernet Cable -Yellow 5-Pin Male-Male - 7.6 m (25 ft)
SimNet to Micro-C (male) cable that connects a SimNet product to a NMEA 2000® backbone 0.5 m (1.6 ft)