SimNet power cable with terminator 2 m (6.6 ft) - red tip
Micro-C female to SimNet 1.0 m (3.2 ft) cable that connects a NMEA 2000® product to a SimNet backbone
NMEA 2000 Micro-C Auto pilot network starter kit: Includes Network power cable, 4.5 m (15 ft) N2K cable, 3 x T-connectors, and 2 x network terminators.
Ethernet adapter cable, RJ45 F to 5 Pin male, 1.5 m (4.9 ft). Ships with water proof boot.
The MiniPlex-3 Series NMEA multiplexers comprises a range of advanced NMEA multiplexers which combines data from multiple navigation instruments.
N2KEXT-15RD - 4.55 m (15-ft) NMEA 2000® cable for backbone extension or or drop cable to connect an additional network device
NMEA2000 Micro-C Medium duty cable. 2 m (6.5 ft). Low loss 18 gauge cable recommended for network backbone runs
Fluid Level Sensor - Connects to a standard suitable tank level sensor and transmits the tank level on the the NMEA 2000 network.
NMEA 0183® - NMEA 2000® converter. 1.8 m (6 ft) Micro-C to bare wire cable
The MiniPlex-BUF is an advanced NMEA buffer/splitter featuring one input and seven outputs.
N2K-T-RD - Micro-C T-connector for connection of an additional network device
NEP-2 Network Expansion Port enables multiple displays to exchange chart data, waypoint and route information, as well as interconnecting radar and echosounder modules.
20 m (66 ft) NMEA2000 Wind vane cable (Micro-C male - Simnet)
Adapter cable: Ethernet yellow 5 pin male to RJ45 female, 2m (6.5ft)
New low loss NMEA2000 4-way joiner. Connect four NMEA2000 Micro-C devices to the NMEA2000 Network.This replaces 000-10996-001
Ελληνικά
Español
