Fluid Level Sensor - Connects to a standard suitable tank level sensor and transmits the tank level on the the NMEA 2000 network.
Fluid Level Sensor - Attaches to a standard suitable tank level sensor and transmits the tank level on the the NMEA 2000 network.
Reports Tank Fluid Level: 0-100%. Pre-configured for Fuel Tank Instance 0
Pre-calibrated to the 33-240Ω U.S. marine standard tank level sender. Can re-calibrated via compatible Navico MFDs to other standard levels like EU 0-180Ω tank level senders
Can be reconfigured* to output the following level types:
| 55904 | ISO Request |
| 60928 | ISO Address Claim |
| 59392 | ISO Acknowledgement |
| 126996 | Product Information |
| 127505 | Fluid Level |
| Tank Cable length | 3.1 m (10 ft) |
SimNet to Micro-C (male) cable that connects a SimNet product to a NMEA 2000® backbone 0.5 m (1.6 ft)
Fuel Data Manager - Monitors Fuel Rate/Fuel Flow from NMEA 2000 engines and fuel flow sensors, and accumulates Fuel Rate into Fuel Used. Outputs seasonal, trip and total fuel used.
NEP-2 Network Expansion Port enables multiple displays to exchange chart data, waypoint and route information, as well as interconnecting radar and echosounder modules.
The IP CAM-1 marine grade 316 stainless steel IP camera. Powered by 12V DC or PoE.
NMEA2000 Micro-C Medium duty cable. 2 m (6.5 ft). Low loss 18 gauge cable recommended for network backbone runs
The MiniPlex-3 Series NMEA multiplexers comprises a range of advanced NMEA multiplexers which combines data from multiple navigation instruments.
Evinrude engine interface cable 4.5 m (15 ft) and T-connector
The MiniPlex-BUF is an advanced NMEA buffer/splitter featuring one input and seven outputs.
NMEA 2000 Micro-C Medium duty cable. 6 m (19.7 ft) Low loss 18 gauge cable recommended for network backbone runs
35 m (115 ft) NMEA2000 Wind vane cable (Micro-C male - Simnet)
The MiniPlex-3 Series NMEA multiplexers comprises a range of advanced NMEA multiplexers which combines data from multiple navigation instruments.
Ελληνικά
Español
