Airmar® 110WX WeatherStation®
Airmar® 110WX WeatherStation® Sensor Only
DST-810 Depth/Speed/Temp Sensor. Plastic thru-hull housing.
Combined Depth, Speed and Temperature sensor in one unit. Perfect for ease of installation as only one skin fiiting is needed.
Weight |
0.9 kg (2.0 lb) |
Acoustic Window |
Urethane |
Hull Deadrise |
Up to 22° |
Data Update Rate |
Depth 1Hz |
Speed 5Hz |
|
Heel/Trim 10Hz |
|
Attitude Accuracy |
+/– 1° nominal after sensor calibration |
Depth Frequency |
235 kHz |
Minimum Depth Range |
0.5 m (1.6') |
Maximum Depth Range |
Up to 100 m (330')—NMEA 2000® |
Speed Range |
Up to 45 knots |
Pressure Rating |
3 m (10') |
Pulse Rate |
20,000 p/nm* (5.6 Hz per knot)—*p/nm = pulses per nautical mile |
Supply Voltage |
9 VDC to 16 VDC—per NMEA 2000 |
Supply Current |
<200 mA—per NMEA 2000® |
Wireless Protocol |
Bluetooth Low Energy (BLE) |
Wireless Range |
Up to 30 feet depending on mount location |
Standard Cable Length |
6 m (20') NMEA 2000® |
Temperature Sensor Accuracy |
±0.5°C (±1.8°F) |
Temperature Sensor Range |
-10°C to 40°C (14°F to 104°F) |
NMEA 2000 Load Equivalency Number (LEN) |
3 LEN |
CE Regulation: |
Complies to IERC60945 |
Airmar® 110WX WeatherStation® Sensor Only
The H5000 Fastnet Interface provides a B&G supported solution for customers wishing to progressively upgrade H3000 systems and/or replace displays on an H3000 system with the latest H5000 Graphic displays.
Paddlewheel Speed Sensor Spare (1996 >)
Through-hull Stainless steel skin fitting with Sea-valve (for use with DST800, DT800, ST800)
WS320 Wireless Wind Sensor including Wireless Interface for connection to NMEA 2000® networks. For masts up to 25m in height.
Airmar 110WX/ 120WX Cable 6 m (19.6 ft) (NMEA 2000 to Device cable)
Wind Speed Cup spare for all B&G MHUs (508, 608, 213, VMHU, WS300, WS700)
The WS320 Wireless Interface: Spare Wireless Interface for the WS320 Wind Sensor system. Receives wireless signals from the WS320 and converts to NMEA 2000.
Airmar IDST800L 235F B-122-RETR 6M
80m (262') mast cable with pre-molded connectors for the WS310 and WS700 series wired wind sensors.
WS310 Wired Wind Sensor with 20m (65.5ft) mast cable and interface for connection to the NMEA 2000® network.
35m (115’) mast cable with pre-molded connectors for the WS310 and WS700 series wired wind sensors.