The H5000 Fastnet Interface provides a B&G supported solution for customers wishing to progressively upgrade H3000 systems and/or replace displays on an H3000 system with the latest H5000 Graphic displays.
The Interface receives instrument data from the H3000 Fastnet network and re-transmits it onto the CAN based H5000 network, the Interface is a valid data source for all instrument data and can be selected from the Network Source Selection in H5000.
Note: Only H3000 to H5000 transmission.
WS320 Wireless Wind Sensor including Wireless Interface for connection to NMEA 2000® networks. For masts up to 25m in height.
Replacement mounting nuts for wind vane and cups for all B&G MHUs (508, 608, 213, VMHU, WS300, WS700)
H3000 Speed Sensor Plastic Flanged
The 213 Masthead unit is an ocean-proven high performance wind sensor, providing raw wind speed and angle data to the instrument system. For H5000 and H3000.
The WS320 Wireless Interface: Spare Wireless Interface for the WS320 Wind Sensor system. Receives wireless signals from the WS320 and converts to NMEA 2000.
Wind vane assembly spare for WS300/700 series wind sensors. Inc. mounting nut.
35m (115’) mast cable with pre-molded connectors for the WS310 and WS700 series wired wind sensors.
20m (65’) mast cable with pre-molded connectors for the WS310 and WS700 series wired wind sensors.
Airmar 110WX/ 120WX Cable 6 m (19.6 ft) (NMEA 2000 to Device cable)
WS310 Wired Wind Sensor with 20m (65.5ft) mast cable and interface for connection to the NMEA 2000® network.
Networked wind sensor for Triton2, Triton, IS42, IS40 and IS20 systems. Sensor only, does not include cable.
Paddlewheel Speed Sensor Spare (1996 >)
Through-hull Stainless steel skin fitting with Sea-valve (for use with DST800, DT800, ST800)
Airmar® 110WX WeatherStation® Sensor Only
Ελληνικά
Español
