Cable Length |
10 Ft |
Fuel Line Diameter |
3/8" (9.5 mm) Inside Diameter |
Flow Rate Measured |
Optimized for 0.6-45 Gal/hr but can measure outside these values |
Added Back Pressure to the fuel system |
0.5 PSI at 20 Gal/hr; 1 PSI at 40 Gal/hr |
Installation Location |
Above the max level of the fuel tank, in-line after the fuel filter and any Y's or T's in the line |
Package |
The Fuel Flow Sensor, N2K T and 2 (two) 1" hose clamps |
Fuel Type |
Gasoline only. The Fuel Flow Sensor does not operate diesel engine fuel systems, or on any fuel system with a return line or sump. |
Hole required to route through a bulkhead |
22mm (7/8") |
Multiple Fuel Flow Sensors possible |
Yes |