FU80 Follow UP remote unit with display. The FU lever can be rotated 70° to port and starboard from midposition. The lever will remain in set position, and the commanded rudder angle/heading change maintained until the lever is returned to mid-position.
You can use the FU80 in FU, AUTO and NoDrift mode.
The unit comes with flush mount kit, 6m factory mounted drop cable and a NMEA2000 T-Joiner.
Technical specifications
For updated technical specifications, compliance and certifications, refer to our websites.
Display
| Display resolution |
128 x 64 (H x W) |
| Display type |
2” Monochrome, Bounded, Transflective |
| Viewing direction |
NF80: 12 o’clock |
|
FU80/QS80: 6 o’clock |
Power
| Power supply |
Via NMEA2000 CAN bus or SimNet |
| Current consumption Off |
Network <20 mA (NMEA 2000: LEN 1) |
| On with max illumination |
Network <110mA (NMEA 2000: LEN 3) |
Interface
| CAN/NMEA 2000 |
Factory connected drop cable with Micro-C connector. 6 m (19.7 ft) |
| SimNet |
Via optional SimNet to Micro-C adapter cable |
Technical
| Housing Front |
Aluminum with black plastic snapon bezel |
| Back |
Plastic cover |
| Temperature |
-25° C to + 55° C (-13° F to +131° F) |
| Weight |
NF80, FU80: 0.5 kg (1.10 lbs) |
|
QS80: 0.4 kg (0.88 lbs) |
Environmental
| Weather |
IEC 60945 sec. 8.8, exposed, front when desk mounted or bulkhead mounted with optional frame. |
|
Corresponds to IPX6 |
| Compass safe distance |
0.4 m (ref. IEC 60945 sec.11.2) |
English
