- Out-of-Stock
- Home
-
Products
add remove
- Communication add remove
- Steering add remove
- Instruments add remove
- About us
- Contact Us
- Home
-
Products
add remove
- Communication add remove
- Steering add remove
- Instruments add remove
- About us
- Contact Us
NAC-2 Autopilot Core Pack - Comes with NAC-2 Autopilot Computer, Precision-9 Compass and RF-25N Rudder Feedback unit.
The NAC-2 Autopilot Computer is the brains behind your autopilot system. NAC-2 contains the control algorithms developed to helm a yacht across a broad range of weather conditions and sea-states, alongside the electronics needed to operate a hydraulic or mechanical drive unit, while also interfacing with other components including heading sensors and rudder feedback units. The NAC-2 was designed for boats up to 10 metres (33 feet) in length and is suitable for low-current hydraulic drives, mechanical drives, or solenoid valves with a current rating of 8 Amps continuous (12 Amps peak).
*Lowrance compatibility is limited to HDS LIVE only.
Mechanical/Environmental
Operating temperature | -25°C to +55°C (13°F to 131°F) |
Protection | Splashproof, IPx5 |
Weight | 0.6 kg (1.3 lbs) |
Overall Dimensions | Width: 7.1 in \ 180 mm |
Height: 2.2 in \ 57 mm |
Electrical
Power supply | 9-31.2 V DC |
Load | 140 mA + drive unit load |
Performance | Drive: 8 A cont., 16 A for 1 s |
Interfaces
Network | 1xMicroC (NMEA2000) |
Feedback | Variable voltage/resistive 0-5V |
Drive output | To PUMP-1 or HELM-1 |
Power supply | 9-31.2 V DC |
Solenoid | 12/24V DC, common, load range 10mA to 10A, off current <1mA |
Clutch | 12/24V DC, min 10mA, max 3A |
16 other products in the same category:
NAC-3 Autopilot Core Pack
NAC-3 Autopilot Core Pack - Comes with NAC-3 Autopilot Computer, Precision-9 Compass and RF-25N Rudder Feedback unit.
QS80 Quick-Stick Steering Lever
QS80 Quick-Stick NFU remote unit with display. Take command and Mode buttons. Provides course change in Auto mode.
AP70MK2 Autopilot Basic Pack
AP70MK2 Professional Autopilot basic pack. Kit contains AP70 MK2 controller, AC70 computer and RF300 rudder feedback. For reversible hydraulic pumps or non-isolated solenoid valves.
NAC-1 Precision Hydraulic Pilot Pack, MKII Pump-1
NAC-1 Precision Hydraulic Autopilot pack: Includes Precision-9 Heading Sensor, NAC-1 Autopilot Computer, PUMP-1 (MkII) Hydraulic Pump – 0.8L reversible hydraulic pump, Standby-Auto button and Micro-C network components.
OP12 Autopilot Controller
OP12 Autopilot Controller - Autopilot Remote keypad with intuitive keys for course change and Standby/AUTO modes. Integrates seemlessly with NAC-2 and NAC-3 based Autopilot systems.
NAC-2 VRF Autopilot Core Pack
NAC-2 VRF Autopilot Core Pack - Comes with NAC-2 Autopilot Computer and Precision-9 Compass.
AP44M-VRF PACK MK2 (MED CAPACITY)
AP44 VRF medium capacity pack MKII. Comprising of AP44 controller, Precision 9 compass, PUMP-2 hydraulic pump (MKII) and NAC-2 autopilot computer.
NAC-3 VRF Autopilot Core Pack
NAC-3 VRF Autopilot Core Pack - Comes with NAC-3 Autopilot Computer and Precision-9 Compass.
NAC-3 Autopilot Computer
The high-current NAC-3 autopilot computer is designed for vessels over 10 metres (33 feet) in length, with the ability to run heavy-duty hydraulic drive pumps & linear rams, and also provides solenoid output.
AP48 Autopilot Controller
AP48 Autopilot Controller - A premium dedicated Control Unit for Simrad Autopilot Systems, with a large rotary dial, dedicated keys for 1° and 10° instant course changes as well as Standby/AUTO, Mode, Power and Menu buttons.
AP44H-VRF PACK MK2 (HIGH CAPACITY)
AP44 VRF high capacity pack MKII. Comprising of AP44 controller, Precision-9 compass,PUMP-3 hydraulic pump (MKII) and NAC-3 autopilot computer.
H5000,Pilot Computer
H5000,Pilot Computer: The record-breaking B&G Pilot features dedicated steering modes and sailing algorithms including Gust Response, Recovery and High Wind Response. It’s been proven in the toughest conditions and most testing environments and is ideal for short-handed cruisers or racers. Note: An H5000 Hydra, Hercules or Performance CPU is required to steer to wind.
Triton² Autopilot Controller
Triton² Pilot Controller. This intuitive keypad can be combined with a B&G Triton² Display to create a fully-featured autopilot controller.
NAC-2 Autopilot Computer
The low-current NAC-2 autopilot computer is ideal for smaller vessels, designed to run small hydraulic drives and mechanical drives for vessels up to 10 metres (33 feet) in length. Also provides solenoid output.
FU80 Follow-Up Steering Lever
FU80 Follow UP remote unit with display. Take command and Mode buttons. Provides course change in Auto mode.