NAC-3 Autopilot Core Pack - Comes with NAC-3 Autopilot Computer, Precision-9 Compass and RF-25N Rudder Feedback unit.
The NAC-3 Autopilot Computer is the brains behind your autopilot system. NAC-3 contains the control algorithms developed to helm a yacht across a broad range of weather conditions and sea-states, alongside the electronics needed to operate a hydraulic or mechanical drive unit, while also interfacing with other components including heading sensors and rudder feedback units. The NAC-3 was designed for boats 10 metres (33 feet) or greater in length and is rated to operate high-current hydraulic drives, mechanical drive units, and solenoid valves with a current rating of 30 Amps continuous (50 Amps peak).
*Lowrance compatibility is limited to HDS LIVE only.
| Temperature, operation | 0 to +55°C |
| Temperature, storage | -32 to +70°C |
| Protection | IPx7 |
| Weight in Kg | 0.7kg, 1.6lbs |
| Dimmension Max size, mm (length x width x height) | 211x196x65.5mm, 8.31"x7,72"x2.58" |
| Mounting | Bulkhead |
| Construction | Plastic |
| Color | Black |
| Cable inlet | Grommet (Spare Incl) |
| Local supply | 12/24 V DC +10-30% |
| NMEA 2000 Load Equivalent number (50mA) | 1 |
| Interface | |
| Reversible motor control of rudder | Max continious load 30A, peak 50A for 1s |
| On/off solenoid control of rudder | 12/24V DC, common, load range 10mA to 10A, off current <1mA |
| Engage output for bypass/clutch | 12/24V DC, min 10mA, max 3A |
| Rudder angle, frequency input | 15V, 1.4 to 5kHz, resol. 20Hz/° OR NMEA2000 |
| NFU port/stbd input and mode indicator output | External open/close contact, common ret, contact current max 30mA |
| Mode input | External open/close or pulse contact for SYSTEM SELECT, common ret, close to activate, contact current max 30mA |
| External alarm output for buzzer/relay | Max 100mA, voltage level as local supply |
| IEC 61162-1 input (NMEA0183 In) | 1 ch |
| IEC 61162-1 output (NMEA0183 Out) | 1 ch |
| IEC 61162-1 speed | 4.8 & 38.4 kbaud |
| NMEA2000 | Certified (pending) |
AP44 Autopilot Controller - Compact and easy to use, the AP44 is your main control panel for the Autopilot. Rotary dial and key function buttons gives you what you need to steer the vessel in a compact unit.
H5000,Pilot Computer: The record-breaking B&G Pilot features dedicated steering modes and sailing algorithms including Gust Response, Recovery and High Wind Response. It’s been proven in the toughest conditions and most testing environments and is ideal for short-handed cruisers or racers. Note: An H5000 Hydra, Hercules or Performance CPU is required to steer to wind.
WR10 Wireless Autopilot Remote. Includes NMEA2000 connected Bluetooth base station.
The low-current NAC-2 autopilot computer is ideal for smaller vessels, designed to run small hydraulic drives and mechanical drives for vessels up to 10 metres (33 feet) in length. Also provides solenoid output.
QS80 Quick-Stick NFU remote unit with display. Take command and Mode buttons. Provides course change in Auto mode.
NAC-2 Autopilot Core Pack - Comes with NAC-2 Autopilot Computer, Precision-9 Compass and RF-25N Rudder Feedback unit.
NAC-2 VRF Autopilot Core Pack - Comes with NAC-2 Autopilot Computer and Precision-9 Compass.
The high-current NAC-3 autopilot computer is designed for vessels over 10 metres (33 feet) in length, with the ability to run heavy-duty hydraulic drive pumps & linear rams, and also provides solenoid output.
FU80 Follow UP remote unit with display. Take command and Mode buttons. Provides course change in Auto mode.
NAC-3 VRF Autopilot Core Pack - Comes with NAC-3 Autopilot Computer and Precision-9 Compass.
AP48 Autopilot Controller - A premium dedicated Control Unit for Simrad Autopilot Systems, with a large rotary dial, dedicated keys for 1° and 10° instant course changes as well as Standby/AUTO, Mode, Power and Menu buttons.
AP44 VRF high capacity pack MKII. Comprising of AP44 controller, Precision-9 compass,PUMP-3 hydraulic pump (MKII) and NAC-3 autopilot computer.
NAC-1 Precision Hydraulic Autopilot pack: Includes Precision-9 Heading Sensor, NAC-1 Autopilot Computer, PUMP-1 (MkII) Hydraulic Pump – 0.8L reversible hydraulic pump, Standby-Auto button and Micro-C network components.
Triton² Pilot Controller. This intuitive keypad can be combined with a B&G Triton² Display to create a fully-featured autopilot controller.
AP70MK2 Professional Autopilot basic pack. Kit contains AP70 MK2 controller, AC70 computer and RF300 rudder feedback. For reversible hydraulic pumps or non-isolated solenoid valves.
Ελληνικά
